Ok as it seems some people can't get it that all single solenoid guns are all just about the same here are some pics of a recent warp link install I did on an Impulse. Please refer in general to any of the other install I have done for more info.
test-sm.jpg (11996 bytes) Ok here we are double checking the voltage polarity to the solenoid to make sure red is + and black is -. ALWAY CHECK THIS

Get a cheap digital multi-meter from Radio Shack $15-$26
solder-noid-sm.jpg (11503 bytes) Here I have pulled back the factory glue to allow me to attach my wires to the noid. In this case we are matching the colored wires because they tested correctly in the first step
link-finish-sm.jpg (13775 bytes) Here the link is all done. I used a standard DigiKey 3/32" phono plug. These are  a little pricy but are well worth it. I cover actually making the cables elsewhere on this site.

 

 

Home Casero À la maison Haupt Domestico